Light & Medium Weight Webbing

JACQUARD WOVEN WEBBING

Using the Jacquard weaving method, lettering and patterns designed to customer requirements are woven from polypropylene or polyester yarns. Specialist Jacquard looms are programmed to weave the design into the body of the webbing, taking into account the width, colours and repeat spacing. The lettering appears on one side and the reverse is plain.

Advantages of Jacquard weaving:

• Virtually unlimited patterning options
• Elaborate and intricate designs possible
• Woven pattern will not fade or wear off
• Ideal for larger quantities

PRINTED WEBBING

Using the sublimation transfer process, we are able to print Polyester webbing with branding, promotional, safety or other messaging up to photographic quality with outstanding results.

Key features of webbing printing:

• Accurately reproduced artwork
• Permanent and colourfast printing
• Double- or single-sided printing
• Available in 20mm, 25mm, 40mm and 50mm standard widths
• Minimum order quantity – 100 metres for standard webbing and for lighter weight bindings
• Cost-effective
• High-quality results
• Ideal solution for lower quantity requirements

Our Technical Webbing Range

Bowmer Bond manufactures a wide range of technical webbing solutions designed for high performance whilst providing enhanced safety for users.

For special performance applications where high strength, low modulus and flame retardant properties are paramount, Bowmer Bond can produce webbings from Technora®, Nomex®, Kevlar® and Dyneema® or equivalent fibres.

Bowmer Bond high performance webbings offer many sought after features such as temperature, abrasion and chemical resistance, with each having unique qualities differentiating it from other technical webbings. If you are unsure which webbing is best for your project, speak to an adviser today.

All technical webbings manufactured by Bowmer Bond use fully traceable raw materials. Our manufacturing process operates to the standards of our quality management system which is certified to ISO9001.

Meta-Aramid Webbing

Meta-aramid webbings such as Nomex® possess many of the same features as Para-aramids but tend to be used in slightly different applications. The Meta-aramid fibre is usually manufactured by wet spinning and is often used in protective clothing for firefighters and other emergency/rescue services due to its high-temperature resistance and its properties in chemical degradation and abrasion.

Other fibres belonging to this group are Conex® and Kermel®. Meta-aramids offer many benefits for high-performing safety applications due to the way the fibres cope with heat transfer.

Para-Aramid Webbing

Para-Aramid webbings possess a range of features and benefits that make it ideal for high-performance applications where high tensile strength, low elongation and temperature resistance are important.

The Bowmer Bond Secubond® range of PVC coated para-aramid webbings offers benefits for applications that involve the restraint of load movement whilst still able to provide functionality via buckle use or ratchet fixing.

Para-aramid webbing is the generic name for well-known materials such as Kevlar® from Dupont® which has endless opportunities for applications such as aerospace and automotive components, industrial safety and protective clothing such as body armour. Technora® and Twaron® also belong to this family of products.

Para-aramid webbings are the most versatile of the technical webbings. It is inherently flame retardant and does not melt at high temperatures which is crucial in many high-performing safety applications. Further to this, Para-aramid is lightweight and provides high-tensile strength along with reduced extension under load.

ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMwPE) WEBBING

Also known by the brand name Dyneema®, this fibre type is woven into webbing which delivers market-leading performance for tensile strength and abrasion resistance. Dyneema® offers excellent strength performance with low extension, therefore these webbings offer outstanding benefits in sports, leisure and outdoor applications.

This fibre family of webbings is ideal for applications which demand high strength (up to 15x stronger than steel and up to 40% stronger than para-aramids on a weight for weight basis), lightweight and durable properties.

Innovation Hub – New Product Development & Webbing Solutions

Bowmer Bond’s Innovation Hub is the centre of our product development capability, combining technical expertise, in-house manufacturing and collaborative design to deliver bespoke webbing solutions at scale.

As a specialist woven webbing manufacturer, we support customers from concept through to full-volume production, providing a fully integrated service that enables speed, flexibility and confidence at every stage of the product lifecycle.

From Concept to Reality

We work closely with customers to transform ideas, drawings or performance requirements into robust, production-ready webbing solutions. Whether developing a new product, refining an existing design or engineering a solution to meet specific standards, our experienced team provides technical guidance throughout the process.

Using CAD-supported design and prototyping, we help visualise assemblies, assess construction methods and ensure the finished product performs in its intended environment. We work with organisations ranging from SMEs to global OEMs, applying the same commitment to quality, functionality and reliability regardless of project size.

Integrated Manufacturing Capabilities

Our Innovation Hub is underpinned by comprehensive in-house manufacturing and processing, enabling us to maintain control over quality, lead times and scalability. Capabilities include:

• Weaving – High-strength, durable webbings produced to defined specifications across a wide range of fibres, constructions and widths

• Sublimation Printing – High-resolution printed webbing for branding, identification and functional markings

• Jacquard Webbing – Woven-in designs and logos integrated directly into the webbing structure for long-term durability

• Cutting – Precision cutting using heat, cold or ultrasonic methods to achieve accurate lengths and clean edges

• Finishing – Edge sealing, treatments and secondary processes applied to enhance durability, consistency and performance

• Sewing & Assembly – Dedicated sewing and assembly departments equipped with industrial and programmable machinery, capable of producing complex, repeatable webbing assemblies

• Hardware Integration – Incorporation of metal and plastic components including buckles, D-rings, eyelets, carabiners, snap hooks and bespoke fittings

This vertically integrated approach allows Bowmer Bond to support initial low-volume development builds through to high-volume manufacturing, ensuring continuity and scalability from prototype to production.

Customisation & Performance Enhancement

Through our Innovation Hub, webbings and assemblies can be customised to suit demanding applications and environments.

Options include specialist cutting and punching, sewn labels for branding or identification, and functional finishes such as:

• Flame retardant

• Anti-static

• Water-repellent

• Anti-bacterial

• Anti-rot protection

• Stiffening treatments

These enhancements allow products to be engineered for safety-critical, industrial, marine, medical and technical end uses.

Quality, Testing & Assurance

Quality is integral to every stage of development and manufacture. Bowmer Bond operates to the ISO 9001:2015 Quality Management System, with structured processes and in-house testing to verify strength, functionality and consistency. This ensures every webbing or assembly meets defined specifications and relevant industry standards where applicable.

A Partner for Innovation

Our Innovation Hub is not a single product, but a manufacturing partnership. It brings together design support, technical know-how and production capacity to help customers innovate with confidence—delivering reliable, scalable webbing solutions built to perform.

With quality and innovation at its core, Bowmer Bond introduces Secubond®, a range of PVC-coated weldable webbing solutions. SecuBond® products combine cost-effective solutions with assured strength, durability, flexibility and performance.

The PVC-coated range includes:

Weldable Webbing

Available in a range of colours, our market-leading product delivers quality, reliability and performance as well as optimal welding speeds and strength of weld. Making it ideal for a broad range of industries and applications.

Weldable ParaAramid Webbing

A range of para-aramid webbings engineered to satisfy applications requiring more specialist performance such as tensile strength and elongation control.

Weldable Woven Loop Webbing

Our “loop” webbing technology offers a weldable surface on one side and an attachment loop on the other. The super-strong structure with a breaking strain of around 175Kgf eliminates the need for metal grommets or pre-assembly.

In addition to webbing production, Bowmer Bond has an established sewing department.

We create a wide range of Webbing Assemblies (sometimes know as Made-up Units), sewn webbing straps and cam buckle straps.

Webbing assemblies are manufactured by our skilled staff using our specialist industrial sewing machines to lockstitch, bartack or flag stitch to our customers’ specifications. For volume orders, we can programme special stitch patterns.

We develop products from customers’ drawings and recommend the most suitable webbing from our Cotton, Polypropylene webbing, Polyester webbing and Nylon webbing ranges.

JACQUARD WOVEN WEBBING

Using the Jacquard weaving method, lettering and patterns designed to customer requirements are woven from polypropylene or polyester yarns. Specialist Jacquard looms are programmed to weave the design into the body of the webbing, taking into account the width, colours and repeat spacing. The lettering appears on one side and the reverse is plain.

Advantages of Jacquard weaving:

• Virtually unlimited patterning options
• Elaborate and intricate designs possible
• Woven pattern will not fade or wear off
• Ideal for larger quantities

PRINTED WEBBING

Using the sublimation transfer process, we are able to print Polyester webbing with branding, promotional, safety or other messaging up to photographic quality with outstanding results.

Key features of webbing printing:

• Accurately reproduced artwork
• Permanent and colourfast printing
• Double- or single-sided printing
• Available in 20mm, 25mm, 40mm and 50mm standard widths
• Minimum order quantity – 100 metres for standard webbing and for lighter weight bindings
• Cost-effective
• High-quality results
• Ideal solution for lower quantity requirements

Our Technical Webbing Range

Bowmer Bond manufactures a wide range of technical webbing solutions designed for high performance whilst providing enhanced safety for users.

For special performance applications where high strength, low modulus and flame retardant properties are paramount, Bowmer Bond can produce webbings from Technora®, Nomex®, Kevlar® and Dyneema® or equivalent fibres.

Bowmer Bond high performance webbings offer many sought after features such as temperature, abrasion and chemical resistance, with each having unique qualities differentiating it from other technical webbings. If you are unsure which webbing is best for your project, speak to an adviser today.

All technical webbings manufactured by Bowmer Bond use fully traceable raw materials. Our manufacturing process operates to the standards of our quality management system which is certified to ISO9001.

Meta-Aramid Webbing

Meta-aramid webbings such as Nomex® possess many of the same features as Para-aramids but tend to be used in slightly different applications. The Meta-aramid fibre is usually manufactured by wet spinning and is often used in protective clothing for firefighters and other emergency/rescue services due to its high-temperature resistance and its properties in chemical degradation and abrasion.

Other fibres belonging to this group are Conex® and Kermel®. Meta-aramids offer many benefits for high-performing safety applications due to the way the fibres cope with heat transfer.

Para-Aramid Webbing

Para-Aramid webbings possess a range of features and benefits that make it ideal for high-performance applications where high tensile strength, low elongation and temperature resistance are important.

The Bowmer Bond Secubond® range of PVC coated para-aramid webbings offers benefits for applications that involve the restraint of load movement whilst still able to provide functionality via buckle use or ratchet fixing.

Para-aramid webbing is the generic name for well-known materials such as Kevlar® from Dupont® which has endless opportunities for applications such as aerospace and automotive components, industrial safety and protective clothing such as body armour. Technora® and Twaron® also belong to this family of products.

Para-aramid webbings are the most versatile of the technical webbings. It is inherently flame retardant and does not melt at high temperatures which is crucial in many high-performing safety applications. Further to this, Para-aramid is lightweight and provides high-tensile strength along with reduced extension under load.

ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMwPE) WEBBING

Also known by the brand name Dyneema®, this fibre type is woven into webbing which delivers market-leading performance for tensile strength and abrasion resistance. Dyneema® offers excellent strength performance with low extension, therefore these webbings offer outstanding benefits in sports, leisure and outdoor applications.

This fibre family of webbings is ideal for applications which demand high strength (up to 15x stronger than steel and up to 40% stronger than para-aramids on a weight for weight basis), lightweight and durable properties.

Innovation Hub – New Product Development & Webbing Solutions

Bowmer Bond’s Innovation Hub is the centre of our product development capability, combining technical expertise, in-house manufacturing and collaborative design to deliver bespoke webbing solutions at scale.

As a specialist woven webbing manufacturer, we support customers from concept through to full-volume production, providing a fully integrated service that enables speed, flexibility and confidence at every stage of the product lifecycle.

From Concept to Reality

We work closely with customers to transform ideas, drawings or performance requirements into robust, production-ready webbing solutions. Whether developing a new product, refining an existing design or engineering a solution to meet specific standards, our experienced team provides technical guidance throughout the process.

Using CAD-supported design and prototyping, we help visualise assemblies, assess construction methods and ensure the finished product performs in its intended environment. We work with organisations ranging from SMEs to global OEMs, applying the same commitment to quality, functionality and reliability regardless of project size.

Integrated Manufacturing Capabilities

Our Innovation Hub is underpinned by comprehensive in-house manufacturing and processing, enabling us to maintain control over quality, lead times and scalability. Capabilities include:

• Weaving – High-strength, durable webbings produced to defined specifications across a wide range of fibres, constructions and widths

• Sublimation Printing – High-resolution printed webbing for branding, identification and functional markings

• Jacquard Webbing – Woven-in designs and logos integrated directly into the webbing structure for long-term durability

• Cutting – Precision cutting using heat, cold or ultrasonic methods to achieve accurate lengths and clean edges

• Finishing – Edge sealing, treatments and secondary processes applied to enhance durability, consistency and performance

• Sewing & Assembly – Dedicated sewing and assembly departments equipped with industrial and programmable machinery, capable of producing complex, repeatable webbing assemblies

• Hardware Integration – Incorporation of metal and plastic components including buckles, D-rings, eyelets, carabiners, snap hooks and bespoke fittings

This vertically integrated approach allows Bowmer Bond to support initial low-volume development builds through to high-volume manufacturing, ensuring continuity and scalability from prototype to production.

Customisation & Performance Enhancement

Through our Innovation Hub, webbings and assemblies can be customised to suit demanding applications and environments.

Options include specialist cutting and punching, sewn labels for branding or identification, and functional finishes such as:

• Flame retardant

• Anti-static

• Water-repellent

• Anti-bacterial

• Anti-rot protection

• Stiffening treatments

These enhancements allow products to be engineered for safety-critical, industrial, marine, medical and technical end uses.

Quality, Testing & Assurance

Quality is integral to every stage of development and manufacture. Bowmer Bond operates to the ISO 9001:2015 Quality Management System, with structured processes and in-house testing to verify strength, functionality and consistency. This ensures every webbing or assembly meets defined specifications and relevant industry standards where applicable.

A Partner for Innovation

Our Innovation Hub is not a single product, but a manufacturing partnership. It brings together design support, technical know-how and production capacity to help customers innovate with confidence—delivering reliable, scalable webbing solutions built to perform.