As standard, the dry thermoplastic TecWeb® is delivered on a roll without foil or silicone paper. On customer request, delivery on a carrier is possible. TecWeb® adhesive is not a film with a closed surface, but a porous three-dimensional structure. The open structure makes the resultant laminate more flexible and breathable. Due to the structure of TecWeb® adhesives, other names such as veil, non-woven, nets or fleece adhesive are common.

TecWeb® offers an extremely versatile pallet of High-Tech adhesives. This large flexibility results from different base polymers used to formulate the webs, e.g., co-polyamides, co-polyesters, co-polyolefins, co-polypropylenes, co-polyurethanes and co-EVA`s.

Various biobased CoPA and CoPES TecWeb® types of based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%.

To process TecWeb®, three fundamental parameters are to be considered: temperature, pressure and time. To activate the thermoplastic web adhesive, a glue line temperature above the melting point is required. Pressure and time are then coordinated with the respective substrates, to ensure the highest quality laminate.

Why use TecWeb®?

Special Characteristics

• predictable performance and adhesion strength
• light weights
• open structure: does not trap air, steam- and air-permeable
• superb mechanical properties, excellent vacuum or thermoforming characteristics
• high resistance to chemicals such as lubricants, fuel and oils
• soft hand and high elasticity of flexibility
• limited penetration into porous or absorbent materials / substrates
• limited rustling noise (compared to a film or foil)

Production / Handling

• supplied in roll form
• continuous production
• easy to work with, high operating speed
• clean handling; no cleaning process necessary
• bonding of large material surfaces
• thermoplastic features
• rapid cooling
• processing and activation by flat-bed laminating, heat and pressure calendering or infra-red systems
• depending on the type of TecWeb®, steam activation and HF welding is possible
• resistance to coldness: unproblematic concerning transport and storage

Economical

• 100 % solids, no water
• environment-friendly: solvent-free and plasticizer-free
• edge to edge coverage
• precise adhesive weight on total surface
• consistent product quality, high reproducibility
• less waste (adaptable widths and weights)

Biobased

• Based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%
• Compostable (industrial) thermoplastic web adhesives and with use of own recycled materials

As standard, the dry thermoplastic TecWeb® is delivered on a roll without foil or silicone paper. On customer request, delivery on a carrier is possible. TecWeb® adhesive is not a film with a closed surface, but a porous three-dimensional structure. The open structure makes the resultant laminate more flexible and breathable. Due to the structure of TecWeb® adhesives, other names such as veil, non-woven, nets or fleece adhesive are common.

TecWeb® offers an extremely versatile pallet of High-Tech adhesives. This large flexibility results from different base polymers used to formulate the webs, e.g., co-polyamides, co-polyesters, co-polyolefins, co-polypropylenes, co-polyurethanes and co-EVA`s.

Various biobased CoPA and CoPES TecWeb® types of based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%.

To process TecWeb®, three fundamental parameters are to be considered: temperature, pressure and time. To activate the thermoplastic web adhesive, a glue line temperature above the melting point is required. Pressure and time are then coordinated with the respective substrates, to ensure the highest quality laminate.

Why use TecWeb®?

Special Characteristics

• predictable performance and adhesion strength
• light weights
• open structure: does not trap air, steam- and air-permeable
• superb mechanical properties, excellent vacuum or thermoforming characteristics
• high resistance to chemicals such as lubricants, fuel and oils
• soft hand and high elasticity of flexibility
• limited penetration into porous or absorbent materials / substrates
• limited rustling noise (compared to a film or foil)

Production / Handling

• supplied in roll form
• continuous production
• easy to work with, high operating speed
• clean handling; no cleaning process necessary
• bonding of large material surfaces
• thermoplastic features
• rapid cooling
• processing and activation by flat-bed laminating, heat and pressure calendering or infra-red systems
• depending on the type of TecWeb®, steam activation and HF welding is possible
• resistance to coldness: unproblematic concerning transport and storage

Economical

• 100 % solids, no water
• environment-friendly: solvent-free and plasticizer-free
• edge to edge coverage
• precise adhesive weight on total surface
• consistent product quality, high reproducibility
• less waste (adaptable widths and weights)

Biobased

• Based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%
• Compostable (industrial) thermoplastic web adhesives and with use of own recycled materials

As standard, the dry thermoplastic TecWeb® is delivered on a roll without foil or silicone paper. On customer request, delivery on a carrier is possible. TecWeb® adhesive is not a film with a closed surface, but a porous three-dimensional structure. The open structure makes the resultant laminate more flexible and breathable. Due to the structure of TecWeb® adhesives, other names such as veil, non-woven, nets or fleece adhesive are common.

TecWeb® offers an extremely versatile pallet of High-Tech adhesives. This large flexibility results from different base polymers used to formulate the webs, e.g., co-polyamides, co-polyesters, co-polyolefins, co-polypropylenes, co-polyurethanes and co-EVA`s.

Various biobased CoPA and CoPES TecWeb® types of based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%.

To process TecWeb®, three fundamental parameters are to be considered: temperature, pressure and time. To activate the thermoplastic web adhesive, a glue line temperature above the melting point is required. Pressure and time are then coordinated with the respective substrates, to ensure the highest quality laminate.

Why use TecWeb®?

Special Characteristics

• predictable performance and adhesion strength
• light weights
• open structure: does not trap air, steam- and air-permeable
• superb mechanical properties, excellent vacuum or thermoforming characteristics
• high resistance to chemicals such as lubricants, fuel and oils
• soft hand and high elasticity of flexibility
• limited penetration into porous or absorbent materials / substrates
• limited rustling noise (compared to a film or foil)

Production / Handling

• supplied in roll form
• continuous production
• easy to work with, high operating speed
• clean handling; no cleaning process necessary
• bonding of large material surfaces
• thermoplastic features
• rapid cooling
• processing and activation by flat-bed laminating, heat and pressure calendering or infra-red systems
• depending on the type of TecWeb®, steam activation and HF welding is possible
• resistance to coldness: unproblematic concerning transport and storage

Economical

• 100 % solids, no water
• environment-friendly: solvent-free and plasticizer-free
• edge to edge coverage
• precise adhesive weight on total surface
• consistent product quality, high reproducibility
• less waste (adaptable widths and weights)

Biobased

• Based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%
• Compostable (industrial) thermoplastic web adhesives and with use of own recycled materials

As standard, the dry thermoplastic TecWeb® is delivered on a roll without foil or silicone paper. On customer request, delivery on a carrier is possible. TecWeb® adhesive is not a film with a closed surface, but a porous three-dimensional structure. The open structure makes the resultant laminate more flexible and breathable. Due to the structure of TecWeb® adhesives, other names such as veil, non-woven, nets or fleece adhesive are common.

TecWeb® offers an extremely versatile pallet of High-Tech adhesives. This large flexibility results from different base polymers used to formulate the webs, e.g., co-polyamides, co-polyesters, co-polyolefins, co-polypropylenes, co-polyurethanes and co-EVA`s.

Various biobased CoPA and CoPES TecWeb® types of based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%.

To process TecWeb®, three fundamental parameters are to be considered: temperature, pressure and time. To activate the thermoplastic web adhesive, a glue line temperature above the melting point is required. Pressure and time are then coordinated with the respective substrates, to ensure the highest quality laminate.

Why use TecWeb®?

Special Characteristics

• predictable performance and adhesion strength
• light weights
• open structure: does not trap air, steam- and air-permeable
• superb mechanical properties, excellent vacuum or thermoforming characteristics
• high resistance to chemicals such as lubricants, fuel and oils
• soft hand and high elasticity of flexibility
• limited penetration into porous or absorbent materials / substrates
• limited rustling noise (compared to a film or foil)

Production / Handling

• supplied in roll form
• continuous production
• easy to work with, high operating speed
• clean handling; no cleaning process necessary
• bonding of large material surfaces
• thermoplastic features
• rapid cooling
• processing and activation by flat-bed laminating, heat and pressure calendering or infra-red systems
• depending on the type of TecWeb®, steam activation and HF welding is possible
• resistance to coldness: unproblematic concerning transport and storage

Economical

• 100 % solids, no water
• environment-friendly: solvent-free and plasticizer-free
• edge to edge coverage
• precise adhesive weight on total surface
• consistent product quality, high reproducibility
• less waste (adaptable widths and weights)

Biobased

• Based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%
• Compostable (industrial) thermoplastic web adhesives and with use of own recycled materials

As standard, the dry thermoplastic TecWeb® is delivered on a roll without foil or silicone paper. On customer request, delivery on a carrier is possible. TecWeb® adhesive is not a film with a closed surface, but a porous three-dimensional structure. The open structure makes the resultant laminate more flexible and breathable. Due to the structure of TecWeb® adhesives, other names such as veil, non-woven, nets or fleece adhesive are common.

TecWeb® offers an extremely versatile pallet of High-Tech adhesives. This large flexibility results from different base polymers used to formulate the webs, e.g., co-polyamides, co-polyesters, co-polyolefins, co-polypropylenes, co-polyurethanes and co-EVA`s.

Various biobased CoPA and CoPES TecWeb® types of based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%.

To process TecWeb®, three fundamental parameters are to be considered: temperature, pressure and time. To activate the thermoplastic web adhesive, a glue line temperature above the melting point is required. Pressure and time are then coordinated with the respective substrates, to ensure the highest quality laminate.

Why use TecWeb®?

Special Characteristics

• predictable performance and adhesion strength
• light weights
• open structure: does not trap air, steam- and air-permeable
• superb mechanical properties, excellent vacuum or thermoforming characteristics
• high resistance to chemicals such as lubricants, fuel and oils
• soft hand and high elasticity of flexibility
• limited penetration into porous or absorbent materials / substrates
• limited rustling noise (compared to a film or foil)

Production / Handling

• supplied in roll form
• continuous production
• easy to work with, high operating speed
• clean handling; no cleaning process necessary
• bonding of large material surfaces
• thermoplastic features
• rapid cooling
• processing and activation by flat-bed laminating, heat and pressure calendering or infra-red systems
• depending on the type of TecWeb®, steam activation and HF welding is possible
• resistance to coldness: unproblematic concerning transport and storage

Economical

• 100 % solids, no water
• environment-friendly: solvent-free and plasticizer-free
• edge to edge coverage
• precise adhesive weight on total surface
• consistent product quality, high reproducibility
• less waste (adaptable widths and weights)

Biobased

• Based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%
• Compostable (industrial) thermoplastic web adhesives and with use of own recycled materials

As standard, the dry thermoplastic TecWeb® is delivered on a roll without foil or silicone paper. On customer request, delivery on a carrier is possible. TecWeb® adhesive is not a film with a closed surface, but a porous three-dimensional structure. The open structure makes the resultant laminate more flexible and breathable. Due to the structure of TecWeb® adhesives, other names such as veil, non-woven, nets or fleece adhesive are common.

TecWeb® offers an extremely versatile pallet of High-Tech adhesives. This large flexibility results from different base polymers used to formulate the webs, e.g., co-polyamides, co-polyesters, co-polyolefins, co-polypropylenes, co-polyurethanes and co-EVA`s.

Various biobased CoPA and CoPES TecWeb® types of based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%.

To process TecWeb®, three fundamental parameters are to be considered: temperature, pressure and time. To activate the thermoplastic web adhesive, a glue line temperature above the melting point is required. Pressure and time are then coordinated with the respective substrates, to ensure the highest quality laminate.

Why use TecWeb®?

Special Characteristics

• predictable performance and adhesion strength
• light weights
• open structure: does not trap air, steam- and air-permeable
• superb mechanical properties, excellent vacuum or thermoforming characteristics
• high resistance to chemicals such as lubricants, fuel and oils
• soft hand and high elasticity of flexibility
• limited penetration into porous or absorbent materials / substrates
• limited rustling noise (compared to a film or foil)

Production / Handling

• supplied in roll form
• continuous production
• easy to work with, high operating speed
• clean handling; no cleaning process necessary
• bonding of large material surfaces
• thermoplastic features
• rapid cooling
• processing and activation by flat-bed laminating, heat and pressure calendering or infra-red systems
• depending on the type of TecWeb®, steam activation and HF welding is possible
• resistance to coldness: unproblematic concerning transport and storage

Economical

• 100 % solids, no water
• environment-friendly: solvent-free and plasticizer-free
• edge to edge coverage
• precise adhesive weight on total surface
• consistent product quality, high reproducibility
• less waste (adaptable widths and weights)

Biobased

• Based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%
• Compostable (industrial) thermoplastic web adhesives and with use of own recycled materials

As standard, the dry thermoplastic TecWeb® is delivered on a roll without foil or silicone paper. On customer request, delivery on a carrier is possible. TecWeb® adhesive is not a film with a closed surface, but a porous three-dimensional structure. The open structure makes the resultant laminate more flexible and breathable. Due to the structure of TecWeb® adhesives, other names such as veil, non-woven, nets or fleece adhesive are common.

TecWeb® offers an extremely versatile pallet of High-Tech adhesives. This large flexibility results from different base polymers used to formulate the webs, e.g., co-polyamides, co-polyesters, co-polyolefins, co-polypropylenes, co-polyurethanes and co-EVA`s.

Various biobased CoPA and CoPES TecWeb® types of based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%.

To process TecWeb®, three fundamental parameters are to be considered: temperature, pressure and time. To activate the thermoplastic web adhesive, a glue line temperature above the melting point is required. Pressure and time are then coordinated with the respective substrates, to ensure the highest quality laminate.

Why use TecWeb®?

Special Characteristics

• predictable performance and adhesion strength
• light weights
• open structure: does not trap air, steam- and air-permeable
• superb mechanical properties, excellent vacuum or thermoforming characteristics
• high resistance to chemicals such as lubricants, fuel and oils
• soft hand and high elasticity of flexibility
• limited penetration into porous or absorbent materials / substrates
• limited rustling noise (compared to a film or foil)

Production / Handling

• supplied in roll form
• continuous production
• easy to work with, high operating speed
• clean handling; no cleaning process necessary
• bonding of large material surfaces
• thermoplastic features
• rapid cooling
• processing and activation by flat-bed laminating, heat and pressure calendering or infra-red systems
• depending on the type of TecWeb®, steam activation and HF welding is possible
• resistance to coldness: unproblematic concerning transport and storage

Economical

• 100 % solids, no water
• environment-friendly: solvent-free and plasticizer-free
• edge to edge coverage
• precise adhesive weight on total surface
• consistent product quality, high reproducibility
• less waste (adaptable widths and weights)

Biobased

• Based on sustainable farmed feedstock polymers (not for feed or food) with a raw material content up to over 90%
• Compostable (industrial) thermoplastic web adhesives and with use of own recycled materials