This category of products include non-woven mat made of 100% glass fiber by needling - thereby achieving the correct consistency of the nonwoven. The fixation is done by simply interlocks of the fibers of each other. For firming is not used any resin or other solidifying substance.

Parameters:

Thickness (mm): 3 - 30

Basis weight (g/m2): 400 - 4,500

Density (kg/m3): 100 - 200

Width (cm): 40 - 300

Thermal conductivity at 800 °C (W/m.K):0.230

Operating temperature

These products are ready to be used in temperatures up to: 800°C

Application

• automobiles
• EuP
• ships
• turbines
• power plants
• boilers
• piping
• safety doors
• exhaust systems

This category of products include non-woven mat made of 100% silica fiber by needling - thereby achieving the correct consistency of the nonwoven. The fixation is done by simply interlocks of the fibers of each other. For firming is not used any resin or other solidifying substance.

Thickness (mm): 3 - 30

Basis weight (g/m2): 400 - 4,500

Density (kg/m3): 100 - 200

Width (cm): 40 - 300

Operating temperature

These products are ready to be used in temperatures up to: 1000°C

Application

• automobiles
• EuP
• ships
• turbines
• power plants
• boilers
• piping
• safety doors
• exhaust systems

This category of products is made from natural hemp fibers which are mixed with two-component binder fibers in a specific ratio, being suitable to achieve required quality. Synthetic fibers are activated by heat, their connectivity with other fiber product is fixed. The advantages of this material are mainly: health harmlessness, excellent accumulation abilities, easy handling and installation, high diffusion openness.

Parameters:

Thickness (mm): 30 - 240

Bulk density (kg/m3): 35 ± 5

Length (mm): 500 - 10,000

Width (mm): 350 - 2600

Composition

Hemp fibers (%):85 - 87

Two-component fibers (%):10 - 12

Soda as fire protection (%):3 - 5

Fire classification:

These products belong to the group of reaction to fire:
D-s1, d0

Application

• wall isolation
• construction isolation
• between - rafter isolation
• under - rafter isolation
• above - rafter isolation
• wood beamed ceilings isolation
• isolation of internal and external wall of wooden racks and walls with metal studs

Advantages:

• from natural fibers
• harmless to health
• from renewable sources

This group of products is made from 100% glass fiber. Strength of mat is secured by stitching fleece cotton thread. It is high-density material which is used primarily as a heat and sound insulating material. These fiberglass mats are environmentally friendly, nonflammable and recyclable.

Thickness (mm): 2,75 - 12

Basis weight (g/m²): 500 - 2,900

Density (kg/m³): 180 - 240

Width (cm): 40 - 200

Operating temperature

These products are ready to be used in temperatures up to: 650 / 800°C

Application

• automobiles
• ships
• building industry
• piping industry
• turbines
• power plants
• boileres
• household thermal insulation

Advantages

• high-density material
• high tensile strengh
• high flexural strength
• very good compression properties

This category of products include non-woven mat made of 100% glass fiber by needling - thereby achieving the correct consistency of the nonwoven. The fixation is done by simply interlocks of the fibers of each other. For firming is not used any resin or other solidifying substance.

Parameters:

Thickness (mm): 3 - 30

Basis weight (g/m2): 400 - 4,500

Density (kg/m3): 100 - 200

Width (cm): 40 - 300

Thermal conductivity at 800 °C (W/m.K):0.230

Operating temperature

These products are ready to be used in temperatures up to: 800°C

Application

• automobiles
• EuP
• ships
• turbines
• power plants
• boilers
• piping
• safety doors
• exhaust systems

This category of products include non-woven mat made of 100% silica fiber by needling - thereby achieving the correct consistency of the nonwoven. The fixation is done by simply interlocks of the fibers of each other. For firming is not used any resin or other solidifying substance.

Thickness (mm): 3 - 30

Basis weight (g/m2): 400 - 4,500

Density (kg/m3): 100 - 200

Width (cm): 40 - 300

Operating temperature

These products are ready to be used in temperatures up to: 1000°C

Application

• automobiles
• EuP
• ships
• turbines
• power plants
• boilers
• piping
• safety doors
• exhaust systems

This category of products is made from natural hemp fibers which are mixed with two-component binder fibers in a specific ratio, being suitable to achieve required quality. Synthetic fibers are activated by heat, their connectivity with other fiber product is fixed. The advantages of this material are mainly: health harmlessness, excellent accumulation abilities, easy handling and installation, high diffusion openness.

Parameters:

Thickness (mm): 30 - 240

Bulk density (kg/m3): 35 ± 5

Length (mm): 500 - 10,000

Width (mm): 350 - 2600

Composition

Hemp fibers (%):85 - 87

Two-component fibers (%):10 - 12

Soda as fire protection (%):3 - 5

Fire classification:

These products belong to the group of reaction to fire:
D-s1, d0

Application

• wall isolation
• construction isolation
• between - rafter isolation
• under - rafter isolation
• above - rafter isolation
• wood beamed ceilings isolation
• isolation of internal and external wall of wooden racks and walls with metal studs

Advantages:

• from natural fibers
• harmless to health
• from renewable sources