MX-Type metallic yarn is essentially M-Type metallic film yarn supported with two ends of filament yarn such as nylon or polyester (20D × 2 ends & 30D x 2 ends), with one filament covered clockwise and the other counter-clockwise. This support gives the yarn higher tensile strength and durability compared to plain M-Type.

• It’s commonly used in:
• Sweaters & knitwear
• Tricot fabrics
• Stockings & hosiery
• Embroidery
• Woven textiles
• Fashion and accessories

• Film Material - Metallized polyester
• filmSupport - YarnNylon/Polyester
• filament ends - (20D/30D, 2 ends)
• Type - Supported metallic yarn (MX-Type)
• Thickness ~ 12 µm, 23 µm
• typicalWidths - 1/69″, 1/85″, 1/100″, 1/110″
• Color Options - Silver, Gold, Multicolour
• Packaging - 500 gm cones, 1kgs cones

Typical Applications

• Sweaters & knit garments
• Tricot & sportswear fabrics
• Hosiery & stockings
• Embroidery & jacquard fabrics
• Accessories, tapes, labels
• Knit & woven decorative textiles

• ST-Type metallic yarn is a filament core yarn (nylon, polyester, rayon) that is fully covered (“round covered”) with metallic yarn (M-type metallized film) at regular intervals to give a strong metallic finish with durability and shine.
  It’s most commonly used for machine embroidery, hand embroidery, decorative woven/trims, labels, lace, and fashion fabrics.

Core Materials & Denier Options (Typical Industry Range)

ST-Type yarns are built from a core filament yarn that determines strength, thickness, and usage. Common core materials & denier ranges include:

🔹 Core Filament & Denier

• Nylon (PA)50D, 70D, 100D, 120D, 140D, 150D, 180D
• Polyester (PE)50D, 70D, 75D, 100D, 110D, 140D, 150D, 180D, 200D, 250D
• Rayon (Viscose)75D, 120D, 150D, 250D

➡️ These cores are wrapped entirely with M-type metallic film yarn (commonly 12 µ thickness) for shine and coverage.

Common Applications

• Machine Embroidery - High sheen + tensile strength
• Hand Embroidery - Smooth finish, consistent metallic look
• Woven & Knitted Trims - Durable & decorative
• Lace, Cord, Ribbon - Uniform metallic coverage
• Garment Decoration - Quality aesthetic appeal.
• Weaving

➡️ Widely used in apparel, accessories, labels, home textiles, interior decoration where visual metallic effect is required.

• SpecificationTypical Value
• Typical film thickness - 12 µm / 23 µm (As per Client Requirements)
• Yarn width - 1/69″ to 1/110″(As per Client Requirements)
• Surface treatment - Metallized aluminum + protective coat
• Colors - Silver, Gold (+ optional) (As per Client Requirements)
• PackagingBobbins - (50 g–300 g) (As per Client Requirements)
• Ironing limit≤135 °C
• Dry heat limit≤180 °C
• Steaming resistance~30 min
• Boiling resistance~1 hr

🧩 Typical Applications

• Embroidery & Weaving & Knitting
• fancy yarn
• Decorative woven and knitted textiles
• Ribbon, lace & upholstery accents
• Craft, interior decoration (non-structural)

MX-Type metallic yarn is essentially M-Type metallic film yarn supported with two ends of filament yarn such as nylon or polyester (20D × 2 ends & 30D x 2 ends), with one filament covered clockwise and the other counter-clockwise. This support gives the yarn higher tensile strength and durability compared to plain M-Type.

• It’s commonly used in:
• Sweaters & knitwear
• Tricot fabrics
• Stockings & hosiery
• Embroidery
• Woven textiles
• Fashion and accessories

• Film Material - Metallized polyester
• filmSupport - YarnNylon/Polyester
• filament ends - (20D/30D, 2 ends)
• Type - Supported metallic yarn (MX-Type)
• Thickness ~ 12 µm, 23 µm
• typicalWidths - 1/69″, 1/85″, 1/100″, 1/110″
• Color Options - Silver, Gold, Multicolour
• Packaging - 500 gm cones, 1kgs cones

Typical Applications

• Sweaters & knit garments
• Tricot & sportswear fabrics
• Hosiery & stockings
• Embroidery & jacquard fabrics
• Accessories, tapes, labels
• Knit & woven decorative textiles

• ST-Type metallic yarn is a filament core yarn (nylon, polyester, rayon) that is fully covered (“round covered”) with metallic yarn (M-type metallized film) at regular intervals to give a strong metallic finish with durability and shine.
  It’s most commonly used for machine embroidery, hand embroidery, decorative woven/trims, labels, lace, and fashion fabrics.

Core Materials & Denier Options (Typical Industry Range)

ST-Type yarns are built from a core filament yarn that determines strength, thickness, and usage. Common core materials & denier ranges include:

🔹 Core Filament & Denier

• Nylon (PA)50D, 70D, 100D, 120D, 140D, 150D, 180D
• Polyester (PE)50D, 70D, 75D, 100D, 110D, 140D, 150D, 180D, 200D, 250D
• Rayon (Viscose)75D, 120D, 150D, 250D

➡️ These cores are wrapped entirely with M-type metallic film yarn (commonly 12 µ thickness) for shine and coverage.

Common Applications

• Machine Embroidery - High sheen + tensile strength
• Hand Embroidery - Smooth finish, consistent metallic look
• Woven & Knitted Trims - Durable & decorative
• Lace, Cord, Ribbon - Uniform metallic coverage
• Garment Decoration - Quality aesthetic appeal.
• Weaving

➡️ Widely used in apparel, accessories, labels, home textiles, interior decoration where visual metallic effect is required.