FET-500 Series

Multi-Functional Laboratory Pilot Melt Spinning Systems

A significant feature is that FET-100 systems can be specified to be multi-functional, allowing for easy and fast conversion between material formats. It configures to all combinations of multifilament, monofilament and melt spinning of nonwoven structures as required.

This highly versatile and flexible system is ideal for research and development, designed specifically for detailed investigation into extruded textile materials. The FET-100 Series comprises the following modules:

FET-100 Extrusion

Central to all FET laboratory and pilot melt spinning systems is the specially developed extrusion module, the FET-100 Extrusion which allows multiple process options. This extrusion module is designed to provide melt spinning capacity to any one of the three downstream process options. The module is mounted on a hydraulic lifting table which permits automated adjustment of the working height

FET-101 Multifilament

FET offers a wide range of bespoke pilot and laboratory melt spinning systems for continuous multifilament applications capable of matching the demands of all users. Each variation of the FET-101 Multifilament option is uniquely specified and designed for world leading companies and research institutes for a wide variety of applications.

FET-102 Nonwoven

Simple integration of the FET-102 Nonwoven option gives the possibility of melt spinning nonwoven materials. Melt blown and spun bond types can both be achieved on the same base system. This is applicable to a broad range of polymers, including viscous materials normally not appropriate for the melt blowing or spun bond process. Applications include resorbable biomedical polymers and engineering grade materials.

FET-103 Monofilament

Utilising the same extrusion module, FET can also provide specialist laboratory and pilot melt spinning systems for monofilament applications, the FET-100 monofilament. As with multifilament equipment, our flexible monofilament systems are being used by high tech organisations and research institutes on a variety of technical and R&D projects

Benefits include substantial savings on cost, floor space and also the ability to add optional equipment in the future. Extrusion module options include multi-polymer capability, bi-component and tri-component and can be specified for high temperature capability and corrosion resistant construction.

Pilot & small scale production wet spinning systems

Where melt spinning solutions cannot succeed, FET provides a viable alternative with pilot and small scale production FET-200 Wet Spinning Systems. These may be used for a variety of solvent and polymer combinations:

• Wet spinning for processing new functional textile materials
• Allows maximisation of polymer and hence fibre properties
• Optimisation of process conditions for transfer to large scale
• Small scale production for bespoke high value products
• Available for multifilament, monofilament and staple fibre formats

The FET-200 Series is available for multifilament, monofilament and fibre in both laboratory and pilot scale. With many high performance applications, such as biomedical and composites, these systems are proven and successfully operating worldwide.

FET-200 Features and Benefits:

• Single or multiple dope vessels of various sizes for batch / continuous operation
• Continuous homogenization of spin dope with temperature control
• Exchangeable precision spin pumps and height adjustable spin engine
• Horizontal, vertical spinning in the coagulation bath, with unique thread-up system
• Temperature control of coagulation and solvent recovery
• Highly efficient washing haul-off systems
• Numerous combinations of washing baths available
• Filament drying systems with hot air circulation
• Flexible configuration of draw line components with multiple drawing zones
• State of the art computerised control system with data acquisition

Dry-jet wet spinning method

This method, also known as gel spinning, is an alternative to wet spinning. Some fibres, when spun directing into the bath, may create micro-voids that negatively affect the fibre properties. The polymer is dissolved in a solvent to make the fibre solution, which is then extruded under heat and pressure into an air gap before it enters a coagulation bath. The produced fibre is then washed and dried before it is heat treated and drawn. This method is often required for high performance fibres with a liquid crystal structure

Vertical wet spinning method

In the past, wet spinning has always been conducted by submersing the spinneret into the solution and conducting the extrusion horizontally. However, at FET, we have recently developed a vertical spinning system. This line utilises the Venturi effect to allow for better exposure of coagulation media with the dope and easier threading up of the yarn. This is particularly useful when working with more challenging coagulation solutions such as concentrated sulphuric acid or highly basic solutions.

All FET-200 Wet spinning systems are tailor made and take into account required throughput polymer/solvent combination and downstream process conditions.

FET-200 LAB

Laboratory scale wet spinning systems

In addition to pilot and small scale wet spinning production lines, FET now also designs and manufactures a lab scale version which is more suitable for the early stages of formulation and process development.

Systems can be supplied for a wide range of different fibre types. These have ranged from corrosive aqueous salt solutions (such as alginate fibres), to acidic systems (such as engineered silk) and also systems using flammable solvents.

FET Spunbond Nonwoven systems

Although the processes share some similarities, the spunbond process uses different techniques to form the filaments compared to meltblown. In the FET spunbond process, high velocity air jets are used to melt draw continuous filaments and to distribute uniform, random array onto the vacuum conveyor. The outcome is that Spunbond webs are typically stronger than their meltblown counterparts. This is due to the Spunbond fibres being generally thicker and having a higher degree of molecular orientation.

Benefits of Spunbond technology

These properties of Spunbond nonwovens provide a number of benefits:

• Tensile strength
• Abrasion Resistance
• Minimal fibre shedding

Spunbond nonwovens are widely utilised by various industries, especially the medical, personal care and hygiene sectors, as an affordable disposable alternative to traditional textiles. Spunbond nonwovens are widely utilised by various industries, from geotextiles to medical devices. They are often employed in combination with meltblown webs to form multilayer laminates that produce high performance fabrics.

Composite Nonwoven Systems

Meltblown and spunbond have different diameter filaments and other property variations. When the two processes are combined, this allows a multitude of technical benefits to be achieved. Meltblown / Spunbond multilayer fabrics include SM (spunbond-meltblown) and SMS (spunbond-meltblown-spunbond), which are frequently used in filtration applications.

Composite nonwovens have the advantage of flexibility to bond with other types of webs, resisting shedding, with relatively higher mechanical strength, and are stable and resilient. They also have the advantage of forming functional fibres, such as antibacterial, and receiving permanent treatment (eg, flame retardancy) at the fibre extrusion stage.

FET’s composite nonwoven systems are proven to provide solutions for nonwovens manufacturers and research establishments globally.

Bespoke Laboratory and Pilot Equipment for Polymer Extrusion

In recent years, FET has become increasingly focused on the field of hi-tech laboratory and pilot machinery. We excel in finding solutions for challenging projects, working with customers and getting to understand the fine details of what they are seeking to achieve. Our background in providing bespoke extrusion lines for manufacturing systems gives us a broad understanding of processes, configurations and operation – elements that can then be practically applied to pilot and laboratory extrusion equipment.

FET laboratory and pilot bespoke systems

Our Laboratory and Pilot Melt Spinning Extrusion Lines are highly specialised and versatile systems that are designed and built to meet the needs of the most demanding research and development teams in the world. They are supplied as self-contained units for ease of installation in a laboratory and/or small scale process evaluation environment. A variety of options are available:-

• Variety of polymer types
• All combinations of yarn types – UDY, POY, FOY
• Multifilament, Monofilament and Non-Woven versions
• Mono, Bi and Tri-Component technology
• High speed versions up to 6,000 m/m
• High temperature versions
• Corrosion resistant versions for special polymers
• Fully integrated computer control system for data logging, trending and storage
• Equipment for additive dosing of extruded polymers

Applications

FET Laboratory Extrusion Lines are suited to a variety of end uses:

• R&D concept testing
• Product development
• Polymer and additive testing
• Small batch production
• New yarn engineering
• Bio Medical yarns
• Risk elimination
• Additive testing

All extrusion lines allow for a high level of bespoke specification to satisfy exacting laboratory conditions. They are ideal for precision melt spinning of exotic polymers and small batch production for medical device applications

Multi-Functional Laboratory Pilot Melt Spinning Systems

A significant feature is that FET-100 systems can be specified to be multi-functional, allowing for easy and fast conversion between material formats. It configures to all combinations of multifilament, monofilament and melt spinning of nonwoven structures as required.

This highly versatile and flexible system is ideal for research and development, designed specifically for detailed investigation into extruded textile materials. The FET-100 Series comprises the following modules:

FET-100 Extrusion

Central to all FET laboratory and pilot melt spinning systems is the specially developed extrusion module, the FET-100 Extrusion which allows multiple process options. This extrusion module is designed to provide melt spinning capacity to any one of the three downstream process options. The module is mounted on a hydraulic lifting table which permits automated adjustment of the working height

FET-101 Multifilament

FET offers a wide range of bespoke pilot and laboratory melt spinning systems for continuous multifilament applications capable of matching the demands of all users. Each variation of the FET-101 Multifilament option is uniquely specified and designed for world leading companies and research institutes for a wide variety of applications.

FET-102 Nonwoven

Simple integration of the FET-102 Nonwoven option gives the possibility of melt spinning nonwoven materials. Melt blown and spun bond types can both be achieved on the same base system. This is applicable to a broad range of polymers, including viscous materials normally not appropriate for the melt blowing or spun bond process. Applications include resorbable biomedical polymers and engineering grade materials.

FET-103 Monofilament

Utilising the same extrusion module, FET can also provide specialist laboratory and pilot melt spinning systems for monofilament applications, the FET-100 monofilament. As with multifilament equipment, our flexible monofilament systems are being used by high tech organisations and research institutes on a variety of technical and R&D projects

Benefits include substantial savings on cost, floor space and also the ability to add optional equipment in the future. Extrusion module options include multi-polymer capability, bi-component and tri-component and can be specified for high temperature capability and corrosion resistant construction.

Pilot & small scale production wet spinning systems

Where melt spinning solutions cannot succeed, FET provides a viable alternative with pilot and small scale production FET-200 Wet Spinning Systems. These may be used for a variety of solvent and polymer combinations:

• Wet spinning for processing new functional textile materials
• Allows maximisation of polymer and hence fibre properties
• Optimisation of process conditions for transfer to large scale
• Small scale production for bespoke high value products
• Available for multifilament, monofilament and staple fibre formats

The FET-200 Series is available for multifilament, monofilament and fibre in both laboratory and pilot scale. With many high performance applications, such as biomedical and composites, these systems are proven and successfully operating worldwide.

FET-200 Features and Benefits:

• Single or multiple dope vessels of various sizes for batch / continuous operation
• Continuous homogenization of spin dope with temperature control
• Exchangeable precision spin pumps and height adjustable spin engine
• Horizontal, vertical spinning in the coagulation bath, with unique thread-up system
• Temperature control of coagulation and solvent recovery
• Highly efficient washing haul-off systems
• Numerous combinations of washing baths available
• Filament drying systems with hot air circulation
• Flexible configuration of draw line components with multiple drawing zones
• State of the art computerised control system with data acquisition

Dry-jet wet spinning method

This method, also known as gel spinning, is an alternative to wet spinning. Some fibres, when spun directing into the bath, may create micro-voids that negatively affect the fibre properties. The polymer is dissolved in a solvent to make the fibre solution, which is then extruded under heat and pressure into an air gap before it enters a coagulation bath. The produced fibre is then washed and dried before it is heat treated and drawn. This method is often required for high performance fibres with a liquid crystal structure

Vertical wet spinning method

In the past, wet spinning has always been conducted by submersing the spinneret into the solution and conducting the extrusion horizontally. However, at FET, we have recently developed a vertical spinning system. This line utilises the Venturi effect to allow for better exposure of coagulation media with the dope and easier threading up of the yarn. This is particularly useful when working with more challenging coagulation solutions such as concentrated sulphuric acid or highly basic solutions.

All FET-200 Wet spinning systems are tailor made and take into account required throughput polymer/solvent combination and downstream process conditions.

FET-200 LAB

Laboratory scale wet spinning systems

In addition to pilot and small scale wet spinning production lines, FET now also designs and manufactures a lab scale version which is more suitable for the early stages of formulation and process development.

Systems can be supplied for a wide range of different fibre types. These have ranged from corrosive aqueous salt solutions (such as alginate fibres), to acidic systems (such as engineered silk) and also systems using flammable solvents.

FET Spunbond Nonwoven systems

Although the processes share some similarities, the spunbond process uses different techniques to form the filaments compared to meltblown. In the FET spunbond process, high velocity air jets are used to melt draw continuous filaments and to distribute uniform, random array onto the vacuum conveyor. The outcome is that Spunbond webs are typically stronger than their meltblown counterparts. This is due to the Spunbond fibres being generally thicker and having a higher degree of molecular orientation.

Benefits of Spunbond technology

These properties of Spunbond nonwovens provide a number of benefits:

• Tensile strength
• Abrasion Resistance
• Minimal fibre shedding

Spunbond nonwovens are widely utilised by various industries, especially the medical, personal care and hygiene sectors, as an affordable disposable alternative to traditional textiles. Spunbond nonwovens are widely utilised by various industries, from geotextiles to medical devices. They are often employed in combination with meltblown webs to form multilayer laminates that produce high performance fabrics.

Composite Nonwoven Systems

Meltblown and spunbond have different diameter filaments and other property variations. When the two processes are combined, this allows a multitude of technical benefits to be achieved. Meltblown / Spunbond multilayer fabrics include SM (spunbond-meltblown) and SMS (spunbond-meltblown-spunbond), which are frequently used in filtration applications.

Composite nonwovens have the advantage of flexibility to bond with other types of webs, resisting shedding, with relatively higher mechanical strength, and are stable and resilient. They also have the advantage of forming functional fibres, such as antibacterial, and receiving permanent treatment (eg, flame retardancy) at the fibre extrusion stage.

FET’s composite nonwoven systems are proven to provide solutions for nonwovens manufacturers and research establishments globally.