FIBERFLON offers a variety of PTFE coated and laminated belting materials. At FIBERFLON we understand the crucial nature of conveyor systems as the nerve center of operations. For drying, curing, thermal bonding of fabrics and non wovens we offer our PTFE open mesh belts. For laminating, curing of composites flooring and textiles we offer our PTFE process belts or multiply endless belts. So we partner with our clients in selecting the best belt to ensure all elements of the production cycle.

• Food and Drug Administration (FDA) compliancy regulation approved for use in food contact processing and packaging (21 CFR 177.1550).
• Dimensionally stable from -99.4° to 500°F (-73° to 260°C).
• Exceptionally durable to stave off oils and grease penetration.
• Non-toxic, tasteless, odorless.
• Extremely low elongation (<1%). 

FIBERFLON® architectural fabrics are made of PTFE coated glass fabrics. The fuoropolymer PTFE is the most durable fabric coating available. The PTFE is applied equally to both sides of the glass fabric. This encapsulates the glass fibers and protects them from potential degradation due to moisture influx.

• Outstanding temperature resistance (from -170ºC to +260ºC)
• Resistant to corrosive agents
• Low thermal mass
• Controlled porosity
• Superior non-stick surface, easy to clean
• non-combustible up to DIN 4102 B1-A2
• Dimensional stability
• Resistance to UV, IR and HF
• Non-toxic
• Superior tracking 

PTFE coated and laminated composite materials, produced by FIBERFLON, are widely used for manufacturing of Non-Metallic Expansion Joints, Insulation Jacketing and Floating Roof Seals for oil storage tanks.Our PTFE/fiberglass composites and laminates are engineered to survive the corrosive environments and severe temperatures.

High quality woven fiberglass fabrics coated with a specially formulated fluoropolymer coating designed to provide enhanced flex properties and excellent high temperature performance, and then laminated with PTFE(Teflon) multilayer cast films to provide superior gas barrier properties.

Flexible PTFE coated fabrics for excellent temperature,fire andchemical resistance, release, and weatherability properties for non-metallic expansion joints.

PTFE -Glass Fabrics with pressure sensitive adhesives provides an excellent release surface for a diversity of industrial applications requiring high temperature, electrical resistance, mechanical strength, fire retardancy and cost effectiveness.

These products are produced with either silicone or acrylic pressure sensitive adhesives. The silicone adhesive coated products have a continuous operating temperature range between -70°C and +260°C while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of -40°C to +170°C.

Fiberflon® silicone PSA products can be supplied as log rolls or slitted tapes. Self-wound (without liner) tapes are available as well. Some applications : Easy release surface on heat sealing and packaging machines, ironing and pressing equipment, covering drying cylinders, lining chutes, release surface on bonding tools.

FIBERFLON offers a variety of PTFE coated and laminated belting materials. At FIBERFLON we understand the crucial nature of conveyor systems as the nerve center of operations. For drying, curing, thermal bonding of fabrics and non wovens we offer our PTFE open mesh belts. For laminating, curing of composites flooring and textiles we offer our PTFE process belts or multiply endless belts. So we partner with our clients in selecting the best belt to ensure all elements of the production cycle.

• Food and Drug Administration (FDA) compliancy regulation approved for use in food contact processing and packaging (21 CFR 177.1550).
• Dimensionally stable from -99.4° to 500°F (-73° to 260°C).
• Exceptionally durable to stave off oils and grease penetration.
• Non-toxic, tasteless, odorless.
• Extremely low elongation (<1%). 

FIBERFLON® architectural fabrics are made of PTFE coated glass fabrics. The fuoropolymer PTFE is the most durable fabric coating available. The PTFE is applied equally to both sides of the glass fabric. This encapsulates the glass fibers and protects them from potential degradation due to moisture influx.

• Outstanding temperature resistance (from -170ºC to +260ºC)
• Resistant to corrosive agents
• Low thermal mass
• Controlled porosity
• Superior non-stick surface, easy to clean
• non-combustible up to DIN 4102 B1-A2
• Dimensional stability
• Resistance to UV, IR and HF
• Non-toxic
• Superior tracking 

PTFE coated and laminated composite materials, produced by FIBERFLON, are widely used for manufacturing of Non-Metallic Expansion Joints, Insulation Jacketing and Floating Roof Seals for oil storage tanks.Our PTFE/fiberglass composites and laminates are engineered to survive the corrosive environments and severe temperatures.

High quality woven fiberglass fabrics coated with a specially formulated fluoropolymer coating designed to provide enhanced flex properties and excellent high temperature performance, and then laminated with PTFE(Teflon) multilayer cast films to provide superior gas barrier properties.

Flexible PTFE coated fabrics for excellent temperature,fire andchemical resistance, release, and weatherability properties for non-metallic expansion joints.