Kermel EZ 185 is a unique blend of hydrophobic, hydrophilic and thermostable fibres. it provides greater moisture management and fast drying, while ensuring the best arc flash performance/weight ratio. The ulitimate comfort in fight, without compromising protection.

• EN ISO 11612 and NFPA 2112
• IEC 61482-1-1
• Arc Rating > 9 cal/cm²
• EN 13034 Typ 6 (protection against liquid chemical)
• EN 1149-3 & 5
• Air Permeability > 170l/m²/s

protectex® -The perfect solution from Corporate Fabrics GmbH as inherently fabric protection against flames, heat and electric arc.

protectex® is ready for anything and offers life-saving protection in extreme situations. The protectex® base fabrics in blends of 99% Kermel® and 1% anti-static fiber are certificated after industrial laundry ISO 15797.

For an even higher wear behavior and excellent performance there is protectex® also in blends of Kermel® and Lenzing FR® with antistatic fibers available.

protectex® fabrics are available in weights of 170 to 265 g/m ² and all spun dyed Kermel®

Article:

• 89471– 170 g/m² (without electric arc)
• 89402– 200 g/m² (electric arc 4 kA)
• 89458– 225 g/m²
• 89484– 250 g/m²
• 89485-- 265 g/m²

Certificated conform:

• EN ISO 11612
• EN 1149-5
• EN 13034
• IEC 61482-1-2

End Use - garments for workers at:

• Police
• Military
• Oil- and Gas-Platforms
• Energy Provider
• Petrol- and Chemical Industry
• Railway / track construction
• Transporters of hazardous goods
• Airports

HiVis Wildland firefighting fabric with high wearing comfort due to excellent air permeability.

• EN ISO 20471
• EN 469
• EN 16689
• ISO 15384

The family of the multi-risk-fabrics “textreme protect®” was expanded by Corporate Fabrics with interesting new features.

Newly developed are stretch-versions with all norms as mentioned below.

All types of textreme protect® are based on an intelligent blend of Kermel® fibers and other fiber types. The protective fabric fulfills the norms EN ISO 20471 warning protections, EN ISO 11612 heat protections and flaming protection, EN ISO 11611 welder protections, EN 1149 antistatic, EN 13034 chemical protections and IEC 61482-1-2 electric arc. The laminated version or the combination of the protective fabric with a laminated hardly inflammable lining fulfils, in addition, EN 343. With a part of Lenzing FR® and the low weight the single fabric types offer an excellent wear behavior.

The application of different weights allows to fulfill different classes in the standards. Another advantage of the protective fabric is the fact that all desired colors can be realized. This leads to the considerable improvement of the washing qualities and fastness in the area of the industrial laundry, because multicolored protective clothing’s can be made out of one fabric type.

The fabrics are certified according to the following standards:

EN ISO 20471 (High visibility warning clothing)

EN ISO 11611 (Protective clothing for welding and related procedures)

EN ISO 11612 (Protective clothing for workers who are exposed to heat)

EN 1149 (Protective clothing for electrostatic properties)

EN 13034-6 (Protective clothing for liquid chemicals)

IEC 61482-1-2 (Protective clothing against the hazards of an electric arc)

End Use:

• EnergyProvider
• Industrial workersexposedtoheat
• Petrol- and Chemical Industry
• Railway / track construction
• Police, Military, CevileDefend
• OilandGas platforms
• Tunnel building
• Waterprovider/ hydroelectric
• Offshore
• Petrol stations
• MetalIndustrie
• Transporters ofhazardousgoods
• Airports
• Ferry staff
• Road bulding…

Finest Polyester/Wool-Stretch fabrics with mulesing free Wool and Trevira brand Polyester produced with post-consumer recycling PET, meeting the high requirements of authorities - also with industial bio-degradeable recycling Polyester.