Roofing: Anticondensation felt for metal roofs

Important issues in metal roof construction:
     • Ventilation
     • Moisture management which is expressed in absorption
       and/or in drainage capacity.

When building with roof panels ventilated but insulated, thermal shock can mean moisture condenses. When the condensation is very high, water can fall and may damage stored produce.
The humidity issues can be solved with our anticondensation nonwoven felt.
This very thin insulation (from 90 gr/m² to 140 gr/m²) will avoid the risk of dripping.
This nonwoven felt will be applied to the steel sheet on the inner side.
B-S1-D0 inflammability (on the metal)

     • Materials: polyester, hydrophobic polyester
     • Weight: from 70 g/m2 up to 250 g/m2
     • Construction: needle punched, calendered
     • Thickness: from 0.5 mm to up to 20 mm
       & through-air bonded

Tile Underlays: Sound insulation

Our nonwoven products have been engineered to reduce impact noise from walking, the dragging of chairs or the dropping object.

Our felt isolates hard surface floors from the subfloor and is designed for: Corporate offices, Education, Hotel/resort residential (dry or wet rooms).

These products also comprise very high acoustic performances: 18 dB≤ ∆Lw ≤ 20 dB* (final result dependent on glue ).

High performing but also easy to handle & very light weight (whilst provided in rolls or tiles), our products do not significantly increase the floor level.

     • Materials: polyester
     • Pile weight: from 200 g/m2 up to 1500 g/m2
     • Construction: needle punched, calendered
       & through-air bonded
     • Thickness: up to 10 mm

Wall covering felt:

Our wall backing non-woven range are engineered to be laminate with paper wall cover by powder or hotmelt coating. They are used for covering bands & cracks in wall and ceiling.

With non-woven backing felt the end product offers a lot of advantages:
     • Breathable
     • Cover deep cracks
     • Sound reduction (absorption is function of weight)
     • Avoids cold walls, reduces condensation

These products are polyester 100% so the felt is safe for the air quality inside home.

     • Materials: polyester, hydrophobic polyester
     • Weight: from 100g/m² up to 500g/m²
     • Construction: needle punched, calendered
     • Thickness: from 0.5mm to up to 20 mm