Built-in flame and high temperature resistant fabric, made of special meta-aramid, para-aramid and antistatic blended yarn. The fabrics offer a high degree of thermal stability, and permanent heat and flame resistant properties. Protection cannot be washed out or worn away after over 100 industrial launderings.
Standards--ISO11612, ISO11611, NFPA2112 , EN1149-5 NFPA70E , ASTMF1506, NFPA 1975, GB8965-2009.

Product code-TS-Petro-A

Fabric Performance
Inherently Flame Resistant-Flame Resistant properties are built-in and cannot wash out. The fabric does not melt, ignite when exposed to flame.
Soft and Comfortable-Fabric with hydrophilic finish, a moisture wicking finish developing extra comfort in hot and humid climate.
Excellent Durability- Natural flame resistant fiber without chemical treatment retains professional protection performance, even after rugged use and multiple industrial washes. Outstanding abrasion resistance and better tensile, tearing strength retention.
Premium Thermal Protection- Protects against convective and radiant heat. Tested according to UL; OEKO-TEX;EN ISO11611&11612;NFPA2112;
ASTMF1930;ASTMF1959
Anti-static for Explosion Risk Protection-Complies with EN1149-3
Environmentally friendly
Available Weight-4.5oz,5.3oz,6oz

Arc flash is one of the most dangerous electrical hazards. These sudden, explosive releases of energy cause tens of thousands of injuries every year. The flash can reach extreme temperatures, up to about 18,000 degrees, which is four times hotter than the surface of the sun. This can instantly cause severe burns, even from several meters away, and can cause clothing and other combustible materials to melt onto skin or burst into flames. The most obvious danger is from shock and electrocution if the arc discharge jumps to a person. Topsafe, we focus on electrical industrial market’s needs and publish our independent R&D ProArc-Mplus series fabric.
CHARACTERISTIC
1. Complete protection solution from HRC1 to HRC4 and from APC1 to APC2.
2. Excellent arc flash protection with light weight fabric. For 180gsm Mplus fabric, it meets HRC2 and ATPV=12 cal.
3. Outstanding flash fire protection with light weight. For 180gsm Mplus fabric, the total area of 2rd and 3rd degree burn injury is less than 15%.
4. Long-life cycle, Mplus series fabric’s FR performance is not going to be reduced by time.
5. Soft and comfortable to wear with good wicking.
STANDARD
ISO11611, ISO11612, NPFA2112, EN1149-3, IEC61482, ASTM F1959, ASTM F 1930 and so on.

TOPSAFE PROSPLASHES PROTECTIVE FABRIC REPEL SPARKS, SPATTER, MOLTEN METALS HAZARDS…AND IS DURALBE
It is well know the Metal Splash lndustry production process is complex, poor production environment. There are many hazards in the production of metal and molten which including aluminum molten liquid and slag splashing, high temperature radiation, blast furnace gas and pulverized coal combustion explosion, In the process of smelting aluminum, the environmental temperature will exceed 40℃, and the radiant heat will be as high as 1.8kW/m2. Therefore, operators must wear protective equipment with anti-molten metal splash, flame retardant, heat insulation function to avoid these sources of danger to the human body caused second degree and above burns.
TOPSAFE developed a new D3 metal splash splash protection fabric with anti-molten metal splash, flame retardant, heat insulation functions, product performance in line with the international standards ISO 11612 requirements, it can effectively prevent the aluminum molten liquid to the staff damage.
Standards -- ISO11612, ISO 11611, EN1149-5, ASTM F1959
Product code-- ProSplash-W-D3-320
CHARACTERISTIC
-Rapid slippage
-Inherent flame retardant
-Comfort to wear

Fire is one of the major disasters that threaten human safety,many people are injured by fire every day.fire fighting fabric is the last safeguard to protect human lift. TOPSAFE provides fire fighting fabrics with extremely lightweight, high strength, and excellent thermal insulation for protection against flame and radiant heat.

With the unremitting efforts of our R & D department, Topsafe specially developed the innovative two combinations of fire fighting fabrics to offer fighters the highest degree of protection while at the same time providing them with the best wear comfort. The fabric can meet EN469 2005/A1:2006 Standard.

CHARACTERISTIC
-Each layer

 Out shell:
FRD-210: TPP 17.5,high thermal shrinkage
FR-Gold-235: TPP17.5, higher thermal shrinkage, Double Layer
 Moisture and Thermal Barrier:
Felt+PTFE(R): With Quilted Aramid Rope, Spaced, Durable, thermal protection
 FR Lining:Aramid/Lenzing FR in Plain, comfortable

-Inherent flame retardant
-Maximum protection
-Light weight
-Comfort to wear

APPLICATION
This fabric is mainly used in Fire Fighting.
CERTIFICATE
EN469 2005/A1:2006

Built-in flame and high temperature resistant fabric, made of special meta-aramid, para-aramid and antistatic blended yarn. The fabrics offer a high degree of thermal stability, and permanent heat and flame resistant properties. Protection cannot be washed out or worn away after over 100 industrial launderings.
Standards--ISO11612, ISO11611, NFPA2112 , EN1149-5 NFPA70E , ASTMF1506, NFPA 1975, GB8965-2009.

Product code-TS-Petro-A

Fabric Performance
Inherently Flame Resistant-Flame Resistant properties are built-in and cannot wash out. The fabric does not melt, ignite when exposed to flame.
Soft and Comfortable-Fabric with hydrophilic finish, a moisture wicking finish developing extra comfort in hot and humid climate.
Excellent Durability- Natural flame resistant fiber without chemical treatment retains professional protection performance, even after rugged use and multiple industrial washes. Outstanding abrasion resistance and better tensile, tearing strength retention.
Premium Thermal Protection- Protects against convective and radiant heat. Tested according to UL; OEKO-TEX;EN ISO11611&11612;NFPA2112;
ASTMF1930;ASTMF1959
Anti-static for Explosion Risk Protection-Complies with EN1149-3
Environmentally friendly
Available Weight-4.5oz,5.3oz,6oz

Arc flash is one of the most dangerous electrical hazards. These sudden, explosive releases of energy cause tens of thousands of injuries every year. The flash can reach extreme temperatures, up to about 18,000 degrees, which is four times hotter than the surface of the sun. This can instantly cause severe burns, even from several meters away, and can cause clothing and other combustible materials to melt onto skin or burst into flames. The most obvious danger is from shock and electrocution if the arc discharge jumps to a person. Topsafe, we focus on electrical industrial market’s needs and publish our independent R&D ProArc-Mplus series fabric.
CHARACTERISTIC
1. Complete protection solution from HRC1 to HRC4 and from APC1 to APC2.
2. Excellent arc flash protection with light weight fabric. For 180gsm Mplus fabric, it meets HRC2 and ATPV=12 cal.
3. Outstanding flash fire protection with light weight. For 180gsm Mplus fabric, the total area of 2rd and 3rd degree burn injury is less than 15%.
4. Long-life cycle, Mplus series fabric’s FR performance is not going to be reduced by time.
5. Soft and comfortable to wear with good wicking.
STANDARD
ISO11611, ISO11612, NPFA2112, EN1149-3, IEC61482, ASTM F1959, ASTM F 1930 and so on.

TOPSAFE PROSPLASHES PROTECTIVE FABRIC REPEL SPARKS, SPATTER, MOLTEN METALS HAZARDS…AND IS DURALBE
It is well know the Metal Splash lndustry production process is complex, poor production environment. There are many hazards in the production of metal and molten which including aluminum molten liquid and slag splashing, high temperature radiation, blast furnace gas and pulverized coal combustion explosion, In the process of smelting aluminum, the environmental temperature will exceed 40℃, and the radiant heat will be as high as 1.8kW/m2. Therefore, operators must wear protective equipment with anti-molten metal splash, flame retardant, heat insulation function to avoid these sources of danger to the human body caused second degree and above burns.
TOPSAFE developed a new D3 metal splash splash protection fabric with anti-molten metal splash, flame retardant, heat insulation functions, product performance in line with the international standards ISO 11612 requirements, it can effectively prevent the aluminum molten liquid to the staff damage.
Standards -- ISO11612, ISO 11611, EN1149-5, ASTM F1959
Product code-- ProSplash-W-D3-320
CHARACTERISTIC
-Rapid slippage
-Inherent flame retardant
-Comfort to wear